14136A, BCA/Timken/Koyo/SKF, Tapered Roller Bearing

$ 29.72


Technical Details

Series

14000

Cone Part Number

14136A

Design Units

Imperial

Cage Type

Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 21400 lbf95100 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 5540 lbf24600 N

Dimensions

d - Cone Bore

1.375 in34.925 mm

B - Cone Width

1.0520 in26.721 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius3 0.03 in0.8 mm

da - Cone Frontface Backing Diameter

1.57 in40 mm

db - Cone Backface Backing Diameter

1.59 in40.5 mm

Ab - Cage-Cone Frontface Clearance

0.07 in1.8 mm

Aa - Cage-Cone Backface Clearance

0.31 in7.9 mm
a - Effective Center Location4 -0.45 in-11.4 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)5 3180 lbf14200 N
C1 - Dynamic Radial Rating (1 million revolutions)6 12300 lbf54600 N

C0 - Static Radial Rating

13900 lbf61700 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 2080 lbf9260 N

Factors

K - Factor8 1.53

G1 - Heat Generation Factor (Roller-Raceway)

18

G2 - Heat Generation Factor (Rib-Roller End)

13.3
Cg - Geometry Factor9 0.0668
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 3 These maximum fillet radii will be cleared by the bearing corners.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.
Sale

Unavailable

Sold Out

Liquid error: Could not find asset snippets/wholesale-now.liquid